| View previous topic :: View next topic |
| Author |
Message |
Joe_Stein
Guest
|
 Posted: Sun Feb 13, 2005 9:00 pm Post subject: Battery to fit grizzly? |
 |
|
I have a Grizzly 18v drill/driver with the panasonic battery. Do any
other 18v batteries out there fit it?
TIA
Joe |
|
| Back to top |
|
 |
Tim Douglass
Guest
|
| Posted: Sun Feb 13, 2005 9:46 pm Post subject: Re: Battery to fit grizzly? |
|
|
On Sun, 13 Feb 2005 16:00:59 GMT, Joe_Stein <kb8qlr@peoplepc.com>
wrote:
| Quote: |
I have a Grizzly 18v drill/driver with the panasonic battery. Do any
other 18v batteries out there fit it?
TIA
|
Not sure about the 18V, but the batteries from my 14.4V Grizzly work
in my 14.4V Harbor Freight. The latch doesn't engage, but the fit in
all the way and the drill works, so I'm OK with it.
Just do a little checking around at a store somewhere and see what you
can find. On the other hand, the genuine Panasonic battery packs are
pretty good and worth the price.
Tim Douglass
http://www.DouglassClan.com |
|
| Back to top |
|
|
Rolling Thunder
Guest
|
| Posted: Mon Feb 14, 2005 2:19 am Post subject: Re: Battery to fit grizzly? |
|
|
On Sun, 13 Feb 2005 16:00:59 GMT, Joe_Stein <kb8qlr@peoplepc.com>
wrote:
| Quote: |
I have a Grizzly 18v drill/driver with the panasonic battery. Do any
other 18v batteries out there fit it?
TIA
Joe
|
If you have a dead battery pack, look for a Battery Plus store. They
can replace the batteries inside instead of buying a new battery
pack. It's some less expensive that way too.
Thunder |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in